Current John Deere Cutters-Shredders Heavy Duty Rotary Cutters Heavy Duty Rotary Cutters

2024 John Deere Heavy Duty Rotary Cutters RC10R

2024 John Deere Heavy Duty Rotary Cutters RC10R

Swipe to View More

  • Year 2024
  • Make John Deere
  • Model Heavy Duty Rotary Cutters
Shop John Deere Pre-Owned
Product Details Specifications Photos
2024 John Deere Heavy Duty Rotary Cutters RC10R

2024 John Deere Heavy Duty Rotary Cutters RC10R

  • Year 2024
  • Manufacturer John Deere
  • Model Name Heavy Duty Rotary Cutters
  • Trim Name RC10R
  • Generic Type (Primary) Heavy-Duty
  • Engine Power Transfer Continuous 120 hp (89 kW) / Peak: 180 hp (134 kW) / Outer Continuous 100 hp (75 kW) / Peak: 140 hp (104 kW)

2024 John Deere Heavy Duty Rotary Cutters RC10R

  • 10 ft. cutting width
  • 540 PTO RPM
  • 4-inch cutting capacity

Features may include:

  • The center axle can be locked easily for transport or service by flipping the lock over the cylinder rod. Wing locks use a pin that can be conveniently stored when not in use. Additionally, on M and R Series, the wing locks are spring-loaded so they can unfold against gravity on slopes up to 5 degrees. Always use the transport lock on the wings and center axle while transporting or moving the machine.
Warranty
  • John Deere is so confident in the reliability of the gearbox that rotary cutters come with a 5-year limited gearbox warranty.
Maintenance
  • John Deere flex-wing rotary cutters are equipped with an easy-clean, smooth-top single deck that allows material, debris, and water to be easily removed from the top of the machine.

Engine

Engine Power Transfer Continuous 120 hp (89 kW) / Peak: 180 hp (134 kW) / Outer Continuous 100 hp (75 kW) / Peak: 140 hp (104 kW)

PTO

PTO Power, Rated Engine Speed Lift-type: 80 hp (60 kw) / Pull-type: 50 hp (37 kW) | 540 rpm

Drivetrain

Driveline Size: Main ASAE Category 5; lift-type / ASAE Category 4; pull-type | Protection: Non-seize, slip-clutch driveline pull-type has equal-angle Category 4 driveline / Connecting: Shock absorbing shafts

Wheels & Tires

Wheels Type: Laminated

Operational

Operating Speed Blade tip speed: 540 RPM / 5,148 m/min / 16,889 fpm / 309 km/h / 192 mph

Chassis

Hitch/Type Lift type: 2, 3 or 3N
Deck Thickness Upper: 0.141 (10) in. / (3.5 (10) mm)| Lower: 0.141 (10) in. (3.5 (10) mm)

Dimensions

Dimensions Cutting capacity: 3 in. (76.2 mm) | Side skirt thickness: 0.25 (3) in. (6 (3) mm) | Blades Thickness: 0.5 in. (13 mm) | Overlap: 2.8 in. (75 mm)
Cutting Width 126 in. (3,200 mm)
Height Cutting: 1 to 12 in. (25 to 305 mm)
Depth, Maximum Cutting chamber: 10.5 in. (267 mm)
Width Blades: 4 in. (102 mm)
Transport Width 132 in. (3,350 mm)
Width, Working Position 10 ft. 6 in. (3.2 m)
Overall Width 132 in. (3,350 mm)
Overall Length 159 in. (4,040 mm)

Weights

Weight Approx: 2,326 lb (1,057 kg)

Features

Features Deck shape: Domed | Deck type: Double decker | Gearcases number: 3 | Blades Type: Single suction | Material flow system: Integrated | blades Holder: Round stump jumper (single suction) for protection of blades and carrier against obstruction damage | Shielding front: chain / rear: chain

Product Photography

Warning WARNING: Operating, servicing and maintaining a passenger vehicle, an off-highway motor vehicle or a recreational marine vessel can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or vessel in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle or vessel. For more information go to https://www.p65warnings.ca.gov/products/passenger-vehicle and https://www.p65warnings.ca.gov/products/marine.